20Km 155M 1x9 Fiber Optical Transceiver , Gigabit Fiber Transceiver RoHS Compliant

FA-TC901S35-20 & FA-TC901S53-20, 20Km 155M 1x9 Optical Fiber Transceiver With SC Single Fiber Port 1310nm 1550nm

Simple Way To Judge Failure Of Optical Transceiver

1. Test whether the optical power is within the target range, if there is no optical signal or optical power. Try the below methods:

Examines the wavelength and measurement units of optical power selected (dBm);

B. Clean end face of optical fiber connector, interface of fiber optic transceiver;

C. Check whether the fiber connector face is black or scratched, whether the fiber connector is broken or not, replace the optical fiber connector to do interchangeability test;

D. Check if there is small bend with the fiber connector;

E. Pluggable optical module can be plugged and tested;

F. Replace the optical module on the same port or replace the same optical module to test the port.

2. Optical power is normal but the link cannot pass. Check the link light.

Product Features

1X9 standard package

Single Fiber Bi-Directional Transmission

Integrated 1310nm/1550 nm Filter

Single +3.3V Power Supply

LVPECL Data Interface

Isolation > 30dB, Cross Talk < -45dB

RoHS Compliant

Compliant with Telcordia (Bellcore) GR-468-CORE

Eye Safety Level Meet Laser Class1, Compliant with IEC60825-1

Specification Of FA-TC901S35-20 & FA-TC901S53-20

Transmitter Section (FA-TC901S35-20):

Receiver Section (FA-TC901S35-20):

Transmitter Section (FA-TC901S53-20):

Receiver Section (FA-TC901S53-20):

optical transceiver module

sfp optical transceiver

20Km 155M 1x9 Fiber Optical Transceiver , Gigabit Fiber Transceiver RoHS Compliant Images