FA-BPC-MPLPM08, MPO To MPO MTP To MTP MPO To LC Multimode OM3 Fiber Optic Patch Cord 8F 12F 24F
In the transmission port connection devices of 40G/100G data transmission applications, such as QSFP fiber optic transceiver, no matter what optical fiber channels connect with several optical fibers, and no matter what type of optical fibers are connected, they will be directly connected through MTP/MPO fiber optic jumpers. Because the channel connection between devices and devices in 40G/100G data transmission needs to form a special mode, so that the channel between the transmitter and the receiver of the device corresponds to each other, so MTP/MPO fiber patch cord is needed to complete the connection.
MPO/MTP fiber optic jumper can provide a variety of applications for all networks and devices that require 100G modules. They used the MT series design of high density and multi-mode optical fiber connector system. The MPO/MTP fiber patch cords are with UPC and APC polished end, and support multi-mode and single-mode applications. With VCSEL laser and its LED light source, 10G OM3 /OM4 MPO / MTP optical fiber jumper can provide 10Gbps data transmission rate in high bandwidth applications, which is 5 times faster than the standard 50um optical fiber patch cord.
At the same time, the multimode MPO/MTP fiberoptic jumper is also a more economical choice for most of common optical fiber communication systems. The single mode MPO/MTP fiber patch cord is mainly used for the data transmission system in the long distance. The MPO/MTP backbone fiber jumper is designed for the application of the data center. Usually, single-mode and multi-mode MPO / MTP optical fiber patch cords will be designed as outer diameter 3mm or 4.5mm round cable, and the two ends of the cable will also be called MPO / MTP connector.
At present, the MPO/MTP high-density push/pull fiber optic jumper is mainly used in three aspects: high density cabling data center, fiber to the home, and connection with PLC splitter, 40G/100G QSFP+, SFP+ and other optical transceivers. Nowadays, a series of high-density parallel optical interconnect products can adapt to the optical transmission of modern data centers. For example, there are custom MPO/ MTP optical fiber patch cords, multi-mode optical looper and QSFP+ high-speed cable assemblies.
Product Parameters Of MPO Fiber Patch Cords
| Fiber connector options | End A: MPO or MTP, End B: MPO, MTP, LC, SC, ST, FC and so on |
| Fiber options | SM or MM |
| Working wavelength range | SM:1250~1650nm MM: 850nm,1300nm |
| Polishing type | UPC or APC |
| Insertion loss( MPO/MTP) | typical value ≤0.50dB, the maximum value ≤0.70dB |
| IL of other connectors | typical value ≤0.20dB, the maximum value ≤0.30dB |
| Rerun loss (MPO/MTP) | APC ≥ 50dB |
| RL of other connectors | UPC≥50dB,APC≥60dB MM≥35dB |
| Optical cable type | Ribbon cable, bundle fiber cable |
| Branch diameter | 2.0mm or 0.9mm |
| Repeatability | ≤0.10dB |
| Exchangeability | ≤0.20dB |
| Durability | MPO: mating 500 times, typical value changes ≤0.20dB Other connectors: mating 1000 times, typical value change≤ 0.20dB |
| Vertical force | <120N (except 0.9mm cable) or customized |
| Working temperature | -20℃to+70℃ |
| Storage temperature | -40℃to+85℃ |
| Fiber options | G652B(B1), G652D(B1.3),G655(B4) G657A1, G657A2, G657B3 (E1) and so on |
Product Tags:
|
|
MPO To MPO MTP To MTP MPO To LC OM3 Fiber Optic Patch Cord Multimode 8F 12F 24F Images
|
